Honda Fit Tow Bar Installation And Review Videos

Best 2016 Honda Fit Flat Tow Set Up - Braking System- Video

Hey everybody, Ryan here at etrailer. Today we're going to be talking about your best flat tow setup for your 2016 Honda Fit. There's going to be five main components needed to flat tow your Honda Fit. You're going to have the baseplate, which the baseplate's going to provide us with a solid connection point. That way, we can hook our tow bar up to it. That tow bar is going to be the second thing that we're going to need. more

5/6/2020 1:52:24 PM

Best 2017 Honda Fit Flat Tow Set Up - Braking System- Video

Ryan: Hey everybody, Ryan here at etrailer. Today we're going to be talking about your best flat tow setup for your 2017 Honda Fit. There's going to be five main components needed to flat tow your Honda Fit. You're going to have the baseplate, which the baseplate's going to provide us with a solid connection point. That way, we can hook our tow bar up to it. That tow bar is going to be the second thing that we're going to need. more

5/6/2020 1:52:07 PM

RoadMaster Falcon Tow Bar Installation - 2011 Honda Fit- Video

Today, on our 2011 Honda Fit, were going to be installing the RoadMaster Falcon All Terrain Toolbar. Part number RM-522. This vehicle has already had the base plate and a previous tow bar installed on it, so were actually just replacing with this new Falcon All Terrain Tow Bar. Were going to need to attach these brackets to the removable arms. We want to make sure that we have the drivers side and that this side points up. Now well take the plate, comes with the kit.Take a hex bolt, go through the plate, the bracket and through the removable arm. more

12/9/2014 2:46:06 PM

Roadmaster Tow Bar Installation - 2012 Honda Fit- Video

Today on our 2012 Honda Fit, well be doing a test fit with our Roadmaster Falcon 2 tow bar, which is rated at 6000 pounds, part #RM-520. To start our test fit, you will need to install the tow bar into the receiver of your tow vehicle. To attach the tow bar to the towed vehicle, you will need to remove the pin on either side of the base plate. You will extend the arms of the tow bar out, lining it up on the bracket of the towed vehicle. Then you will reinstall the pin and the clevis pin that goes through it. You will repeat this for both sides. more

5/22/2013 2:12:18 PM